If the LaserJet Pro is your new printer, and you’re looking for guidance on initiating the setup, you’re at the right destination. We will take you through the entire process of configuring your printer, linking it to your network, and downloading the essential software and drivers. This guide on 123.hp.com/setup will assist you, regardless of your OS. With our detailed walkthrough, you’ll be all set to print, scan, and copy in no time. Let’s dive in!
Setup Your HP Laserjet Pro with 123.hp.com/setup
Before you begin the installation of your HP LaserJet Pro MFP M28W printer, there are a few essential things you’ll need. Make sure to have a computer with an active Internet connection and compatible operating system, the printer itself, a USB cable if you’re opting for a wired connection, access to your wireless network information if you’re connecting wirelessly, and the installation CD if provided. You may also need to have administrator rights on your computer to install software and drivers. Finally, have the printer’s user manual handy, as it may contain specific instructions or troubleshooting information.
Here is the 123.hp.com/setup manual to guide you in configuring your printer. The steps are as follows:
Solution 1: Utilizing the Installation CD
If you possess an installation CD for your LaserJet Pro , these step-by-step instructions will make setup effortless:
-
Place the Printer installation CD in your system/computer’s CD-ROM drive.
-
Adhere to the on-screen instructions to install the printer’s software and drivers. Choose your printer model and OS during installation.
-
Employ the supplied USB cable to link your printer to your computer. The needed drivers will be auto-installed after the computer identifies the printer.
-
Following the installation, customize your printer settings, including paper size, print resolution, and ink status.
-
Then, connect the printer to your Wi-Fi network using the Wireless Setup Wizard on the printer or the HP Smart app on your mobile device.
-
Lastly, print a test page or document to verify if everything is working fine. If not, inspect the printer’s status and fix any problems.
-
Think about adding extra software or applications for efficient printer management, like the HP Smart app or HP Print and Scan Doctor.
Solution 2: Without the CD
You can also configure your LaserJet Pro by obtaining the required software and drivers from HP’s official website. Here’s the process with 123.hp/setup:
-
Make sure your printer is on and linked to your Wi-Fi network.
-
After your printer connects to the internet, visit the HP website and find the support section for your printer model.
-
Choose your OS and download the most recent software and drivers. Remember to download the file so you can access it easily.
-
Once downloaded, open the file and follow the on-screen instructions to install the printer drivers.
-
After the installation, you can adjust the printer settings like paper size, print quality, and ink levels.
-
Lastly, print a test page or document to ensure everything is set up correctly.
Conclusion
By adhering to these uncomplicated steps, you can effortlessly configure your LaserJet Pro using the 123.hp/setup manual. The process involves downloading the necessary software and drivers from HP’s website. Refer to the user guide if you come across any difficulties during installation. Don’t hesitate to contact our skilled team if you require further help. With careful observation and patience, your printer will be fully functional without delay. Thank you!
